G-man

G-man

BBQ king
Right i have got me axle in bits! and..............i need a half shaft uj:mad: i also need to replace me swivel ball:mad: (i have one in me shed:D ) and me lock stop had been welderd into the hole:mad: :eek: :( :cool: :rolleyes: , should i just cut me losses and fit a second hand disco axle to it? me uncles mate is gonna convert his series to disco axles and can make the requires plates etc.. what do you think i should do?
 
i've got the exact same problems with my front axle plus every oil seal is leaking!! i've just got all the bits to rebuild it and a disco diff to go in at the same time, its got to be easier than converting a disco axle.

would it be possible to take the disco diff, half shafts, swivels and hubs and fit to the series axle casing?? or are the halfshafts too long??
 
i wanna go to disco axles to give me a wider track and give me better steering lock(more space til ye hit the springs) i am currently doing my axle(just poped in for a **** and a cuppa tea) i am gonna have to wait til tomorow to get the uj but i can fill the rest of my time cleaning and painting the stuff thats going back on so it will be nice and shiney for the mud
 
ok then i now have the painting done and finnished the new bits are waiting to go on


BUSTER!!!!!!!! need advice when you did your swivelballs how did you get the halfshaft bearing out without fookin it?
 
G-man said:
ok then i now have the painting done and finnished the new bits are waiting to go on


BUSTER!!!!!!!! need advice when you did your swivelballs how did you get the halfshaft bearing out without fookin it?
Click to expand...
Ah just pulled the whole thing out in a wonner G-spot. It came out real easy... ah'm presumin' yer talkin' about yer cv joint and shafts;) :D
 
cheers fer that doobs best i get me brass drift out then
Bust dunt yours have a bearing at the back of the ball by the flange (axle case end?)
 
later axles look so much easier to do than series ones...... the 5/8 nuts n bolts that hold the swivel ball on a series are a bastard to undo!


have looked through paddocks parts list and that don't list a bearing so it must just rely on the cv holding it up...............
 
my work area for tonight
P210908_2200.jpg
 
is fixed :D shoulda posted this monday night but didn't get round to it she now drives in a strait line and doesn't wobbe between 30 and 40 mph
 
i've done me rear wheel cylinder, but me brake lights have stopped working gaaaaaaah does it never end........................
 
You must log in or register to reply here.

Similar threads

proto57
Freelander 2 (LR2) Baffling (to me!) front Half-shaft/Axle Length Mystery! Too short, twice???
Replies
10
Views
650
Zorro587
Zorro587
S
rear axle holes
Replies
9
Views
1K
Wildefalcon
W
dag019
Which stub axle seal do I need?
Replies
3
Views
780
tottot
tottot
mad85
Disco 2 Front hub/axle seal leaking
Replies
17
Views
982
Gingerbread
G
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs