alarmfitter
New Member
hi my electric seats came without the loom to the becm any ideas what wires i need to run live and earth to thanks
Irishrover
Well-Known Member
Not just a matter of running a 12v supply. You firstly need a "H" line Becm. Next comes the seats with the outstation fitted, followed by the harness and relevant uprated door mirrors and outstation.
The Becm controls the seat functions via the electric motor control circuitry and motor feedback data.
The Becm controls the seat functions via the electric motor control circuitry and motor feedback data.
alarmfitter
New Member
hi the seats are complete with the outstation im only missing the loom down to the becm so i need to power the outstation wich i beleive is 12v+ and earth
Irishrover
Well-Known Member
Have a look at RAVE electrical section. You will see all relevant pinouts for the wiring loom.
alarmfitter
New Member
got the origanal seat loom 3 plugs and 1 earth job done
