Corne215

Member
Hi guys
My gearbox run without oil my bad, so it packed up.
Got new one R380 gearbox put new clutch new fork and everything so i fit the new gearbox put everything back but now it does not want to select gear when idling, its select's when the motor is off or when trance Ver case is in neutral.
if the disco is off and u put it in gear and press the clutch in the Landy jumps forward
I removed the gearbox again to check if i did something wrong but did not see anything wrong can it be that my clutch is
can anyone please help
I have a video i can send to someone that can provide me with a cell number
 
Clutch drag, check and adjust to suit assuming you've assembled the clutch correctly using the right parts.

In effect your clutch isn't fully clearing when operated.
 
Or it's not been put together correctly
I'm working with the manual and I followed it step by step 1 to 84 to make sure I did every step correctly i took the gearbox out again to make sure but still does the same.

but the clutch feels soft
 
I'm working with the manual and I followed it step by step 1 to 84 to make sure I did every step correctly i took the gearbox out again to make sure but still does the same.

but the clutch feels soft
1734443123408.png
1734443123408.png
 
How much free play is there at the clutch pedal i.e. pushing fresh air before it appears to be operating something?

You did use the correct fork didn't you?
Post the part numbers of the items used so someone can check or confirm for you?
 
How much free play is there at the clutch pedal i.e. pushing fresh air before it appears to be operating something?

You did use the correct fork didn't you?
Post the part numbers of the items used so someone can check or confirm for you?
clutch kit STC8358AP
Clutch fork FTC2957G
push rod FTC3912
Clutch release bearing FTC5200G
 

Similar threads