Hello everyone! I am new to the landy world. I recently bought a discovery 2 td5 from 2003. I bought it with the M and S lights flashing but after research i thought it could only be a bad xyz switch. I could have never been more wrong. I have tried many things but without luck. I have replaced the wiring loom to the gearbox. I have tried 2 xyz switches that I cleaned up and aligned correctly with the adjustment tool, I have placed a new battery that has 12.7V when car is of and (+/-)14.3V when running. First the lights would pop up after driving a couple meters but after changing all these things I can drive for a km or 2, it is never the same distance. I have also cleaned out the ecu for oil. I have sprayed the tranny ecu and plug with contact cleaner. Nothing seams to help. I am always getting the fault p0743. Also I recently bought a Bluetooth device that I plug in my sigaret lighter plug and when the fault is about to appear the music starts cracking realy bad and it’s stays like that even when I clear the code. Until I get into 3de gear again and then the music is normal again. I am absolutely out of ideas. Past weekend I have placed a new ground from the torque converter to the chassis and then I drove a whole day without problems but the day after the fault came back. Please can someone help me? ☹️
 
Welcome to the forum.
Try posting your M&S fault question in the Discovery section. You’ll get more hits there mate.
 
Welcome to the forum
I7pha4t.jpg


Main forum index:
https://www.landyzone.co.uk/forum

Discovery:
https://www.landyzone.co.uk/forum/land-rover-discovery.8
 

Similar threads