Henry.adams
Active Member
Anyone have any idea what that round thing is on top of this lt230 transfer case I’ve never seen it before
D1Nut
Well-Known Member
Henry
would it be possible to take a pic of where the intermediate shaft exits the casing on the gearbox side please as I have an idea to seal the shaft exit and need to see if it is proud and how much space is around the edge of the shaft to attach my "plaster " idea
thks
would it be possible to take a pic of where the intermediate shaft exits the casing on the gearbox side please as I have an idea to seal the shaft exit and need to see if it is proud and how much space is around the edge of the shaft to attach my "plaster " idea
thks
Henry.adams
Active Member
So it’s for electric solenoid to activate the cdl ? Is that right?
Henry.adams
Active Member
I will take some pictures for you when I’m at the unit later today.
That said I’m not exactly sure what you want a picture of lol
No. Its an interlock. I.E certain things have to be in place before it will allow.
I am not 100% sure but think its for Hi/Lo shifting. But dont know why or on what models (possibly Autos).
But yours has been removed of its solenoid otherwise you would have some wires coming out.
J
D1Nut
Well-Known Member
Don't want to derail this thread so some pics at an angle to show depth or protrusion of the shaft and the space around the shaft would be great
thks
Henry.adams
Active Member
I see that makes more sense must be an uncommon set up Thanks for the help
Henry.adams
Active Member
That would make sense thanks
Henry.adams
Active Member
I sent you a message
D1Nut
Well-Known Member
replied
