mordzy

Active Member

• Dec 15, 2015

• #1

ok so my truck has had a lift at some point in its life using a terrafirma kit. I'm not sure how hight but id guess at 2" you might be able to tell from my profile pic?

Anyway, I'm not a huge fan of lifts and the guy who did it didn't add castor corrected radius arms so the steering geometry is off.

Can i just buy stock springs? or do i need something else. any idea on what springs i need? blah blah.

i thought about lowering below stock but figure id have a castor issue the other way.

 

flat

Well-Known Member

• Dec 15, 2015

• #2

Just buy stock length springs.

Why would you want to go below standard height?

 

nobber

Well-Known Member

• Dec 15, 2015

• #3

Make sure you buy the correct spring rates, I put stock HD springs on mine, ride height is spot on.

 

Kwakerman

Well-Known Member

• Dec 15, 2015

• #4

You may need standard dampers depending how you plan to use it. They limit the maximum articulation and stop the rear springs from dislocating if you are planning to go off roading. For normal road use your current +2 ones will do (assuming they were fitted with the springs) .

 

nobber

Well-Known Member

• Dec 15, 2015

• #5

Wont +2 dampers be longer than stock and thus bottom out sooner?

 

Kwakerman

Well-Known Member

• Dec 15, 2015

• #6

nobber said:

Wont +2 dampers be longer than stock and thus bottom out sooner?

Click to expand...

Possibly if off road but how often do you bottom the suspension in normal road use?