I,ve recently fitted a recon gearbox,which is going well except that the transfer lever just touches the metalwork and makes a squeak.
I have had a look and the box seems to sit half inch or so too far over the drivers side.
I have loosened all the bolts on the mounting brackets but there doesn't seem to be any adjustment. I have measured the mounts and they appear to be o.k.
The mounting brackets were on the new gearbox when I got it. Do they do different types?
I have fitted a 4mm shim to bring it over so that the squeeking has now gone, but any ideas for a proper fix would be appreciated.
I have had a look and the box seems to sit half inch or so too far over the drivers side.
I have loosened all the bolts on the mounting brackets but there doesn't seem to be any adjustment. I have measured the mounts and they appear to be o.k.
The mounting brackets were on the new gearbox when I got it. Do they do different types?
I have fitted a 4mm shim to bring it over so that the squeeking has now gone, but any ideas for a proper fix would be appreciated.