FFG · Mar 15, 2019

Bought some locking wheel nuts for the wheels and tried to remove one the other day and the pins on the tool bent. Only took the old wheel off and put these on so the tools has been used 10 times. they were £32 when I bought them (with the nuts) so not cheap. Contacted the original supplier who isn't bothered so I either need a new tool or have to buy a new set. If I have a new set the locking nuts will have costs me more than the wheels did???? Does anyone have a spare tool or suggestions, same as these:
https://www.ebay.co.uk/itm/Land-Rov...covery&hash=item1ca23e25fa:g:osQAAOSwKTValD1c
I was thinking of getting these as the offer a supposed lifetime guarantee.
They were originally bought as I had Disco 1 steel wheels but the ones listed for Disco 1 don;t seem to list series as a fitment. Its a '74 S3. Now has 7x16's with new Avon Rangemasters.
FFG

dag019 · Mar 15, 2019

FFG said:
Bought some locking wheel nuts for the wheels and tried to remove one the other day and the pins on the tool bent. Only took the old wheel off and put these on so the tools has been used 10 times. they were £32 when I bought them (with the nuts) so not cheap. Contacted the original supplier who isn't bothered so I either need a new tool or have to buy a new set. If I have a new set the locking nuts will have costs me more than the wheels did???? Does anyone have a spare tool or suggestions, same as these:
https://www.ebay.co.uk/itm/Land-Rover-Discovery-Defender-Locking-Nuts-Steel-Wheels-M16x1-5-Set-5/122981066234?fits=Modeliscovery&hash=item1ca23e25fa:gsQAAOSwKTValD1c
I was thinking of getting these as the offer a supposed lifetime guarantee.
They were originally bought as I had Disco 1 steel wheels but the ones listed for Disco 1 don;t seem to list series as a fitment. Its a '74 S3. Now has 7x16's with new Avon Rangemasters.
FFG

I would chase the supplier again. I had this style fitted to my 110 for years. I bought them second hand at one of the auto jumbles, and used them for years without damaging the tool. Therefore it must be poor manufacturing or poor quality materials rather than the design.

FFG · Mar 15, 2019

I have chased them a couple of times. Just poor quality - the pins are a different colour to the tool which doesn't seem to be the case on the ones I can now find. Will send a picture this time so they can see how poor it is.

rob1miles · Mar 15, 2019

I use this design on my trailer, don't have any on the Series, but would get some if I fit new tyres. I don't think this type is very secure, a universal socket would undo them, but that's not a bad thing if you loose the tool. More deterant than prevention.

steve2286w · Mar 15, 2019

Can you cut off a bit off the bent pins, they might be less prone to bending , then to keep them in when loosening I would use a jack Off a wall to keep it in place, if the pins are totally gone then redrill and fit stronger steel

Blackburn · Mar 15, 2019

FFG are the wheel side of them nuts conical to fit into the rim?
Looks like they are flat in the pic.

FFG · Mar 16, 2019

Blackburn said:
FFG are the wheel side of them nuts conical to fit into the rim?
Looks like they are flat in the pic.

They are conical - Had Disco 1 steels on when I bought it but now got LWB 7x16 wheels with tubes. Got the locking nuts from RST but they only do Bearmach ones now which I assume are better quality and about £13 more than I paid.

FFG

Active Member

dag019

Well-Known Member

FFG

Active Member

rob1miles

Well-Known Member

steve2286w

Well-Known Member

Blackburn

Well-Known Member

FFG

Active Member

Similar threads