Hi All,
I am currently rebuilding a Series 3 lightweight, with 200 TDI Disco conversion, the tubo is sitting just over the chassis leg, and I have been told that you can rotate the turbo. I know this involves drilling 2 holes and tapping out the threads. Just wondering if anyone has done this and is it a difficult job. Thanks.

There are the 4 bolts and a big circlip that allows it to rotate, if you did this would it get it out of way of chassis

also try this one in the series engine or series land rover forum as likely more peeps might have tried it on there

have you seen this
http://www.expeditionlandrover.info/200tdiconversionIntro.htm

Thanks Steve, will have a good read through this.