Can somone help please,
18cc freelander on a 05 plate, have put a new master/slave assembly on but the cluch pedal is solid, a wee bit look around and it seems that the leaver that the slave gose on to is siezed, so with the aid of a heavy hammer and a can off wd40 i have got it to move about an inch, how far dose it travel normaly and should it be free enough to move by hand and how far should i go with the hammer before i admit defeat and send it to a garage.
rj75....
18cc freelander on a 05 plate, have put a new master/slave assembly on but the cluch pedal is solid, a wee bit look around and it seems that the leaver that the slave gose on to is siezed, so with the aid of a heavy hammer and a can off wd40 i have got it to move about an inch, how far dose it travel normaly and should it be free enough to move by hand and how far should i go with the hammer before i admit defeat and send it to a garage.
rj75....
