Alan Crossley · Apr 30, 2012

I recently bought a set of five 16" land Rover Alloy wheels which are marked with the following on the inner side of the wheel:

7.0 JX16AH2

ET 57.0 E-DOT

RRC000040 MNH

C Land Rover SF1

I bought them from a man who has "gone to ground" who said that he took them of his own Land Rover Defender.

Although i have not tried to fit them to the car itself, I have removed the spare and attempted to fit the new rim to the spare carrier.

..... You are all at least one step ahead of me at this stage but i'll go on anyway!... They did not fit!!!

I can not find the vehicle that these where manufactured for. The words made in Hungary are also on the inner rim and they are dated at 01.12.03 & 04

Can any one tell me what vehicle these very shiny Land Rover Wheels are intended for? I would like to sell them on to someone who has a car for these.

regards (or should it be Retard)

Alan

buckshot · Apr 30, 2012

Alan Crossley said:
I recently bought a set of five 16" land Rover Alloy wheels which are marked with the following on the inner side of the wheel:

7.0 JX16AH2

ET 57.0 E-DOT

RRC000040 MNH

C Land Rover SF1

I bought them from a man who has "gone to ground" who said that he took them of his own Land Rover Defender.

Although i have not tried to fit them to the car itself, I have removed the spare and attempted to fit the new rim to the spare carrier.

..... You are all at least one step ahead of me at this stage but i'll go on anyway!... They did not fit!!!

I can not find the vehicle that these where manufactured for. The words made in Hungary are also on the inner rim and they are dated at 01.12.03 & 04

Can any one tell me what vehicle these very shiny Land Rover Wheels are intended for? I would like to sell them on to someone who has a car for these.

regards (or should it be Retard)

Alan

dunno about the serial numbers but what year is your land rover? if its an earlier 1 its your axles are wrong for the wheels or vice-versa can get around this problem with some 20mm/30mm wheel spacers

ricc · Apr 30, 2012

wot "car" are you trying to fit them to ?

a pic of the wheels might help or a link to similar on fleabay

ebbadger · Apr 30, 2012

Just post the PCD and we will give you a list of vehicles they will fit...

If you arent sure how on a 5 stud wheel you measure centre of a bolt hole to a line opposite drawn from the centre of the two 'opposite holes' , ie half way between the two opposite holes... is it 114mm by any chance???

Cheers Steve

Alan Crossley · Apr 30, 2012

The wheels can be seen at

Land Rover 16" Alloy wheels (5) as new | eBay

Alan

Alan Crossley · Apr 30, 2012

the car that they are to go on is year 2000 Defender

buckshot · Apr 30, 2012

Alan Crossley said:
the car that they are to go on is year 2000 Defender

then yer out of luck bud that is disco2 wheels if you want to fit them to your fender you can get some wheel adapters will try to find you a link

Alan Crossley · Apr 30, 2012

Thanks for your reply you nasty old....!

The cost of the wheel spacers is going to be expensive. I have posted the wheels on ebay tp see if anyone else knows what they are and if someone might be interested.

thanks for your help

regards

Alan

gas · Apr 30, 2012

bloke gon to ground now

sounds like some other poor sod has recently

woken up to a defender on bricks or gone

you should give em to me

i will dispose of the evedence for you

buckshot · Apr 30, 2012

LANDROVER 90 110 DEFENDER DISCOVERY WHEEL ADAPTORS | eBay
here ya go

parky91 · May 1, 2012

Might want to change your ebay add since you now know what they are made to fit, just so other people know when bidding and so you get some bidders

Alan Crossley

Well-Known Member

buckshot

Well-Known Member

ricc

Well-Known Member

ebbadger

Well-Known Member

Alan Crossley

Well-Known Member

Alan Crossley

Well-Known Member

buckshot

Well-Known Member

Alan Crossley

Well-Known Member

gas

Well-Known Member

buckshot

Well-Known Member

parky91

Active Member

Similar threads