M

mrblonde

New Member

• Aug 16, 2010

• #1

My L322 all the doors lock once you pull off which is fine, but if i pull up to pick someone up (not in that way ), so far the only way I've worked out how to open passenger front, or either rear doors is to either lean over and pull handle twice (once to unlock, 2nd time to open), or turn motor off, remove key, arm the alarm then unarm it!

Surely theres an easier way people?

Thanks in advance

 

Voguely

New Member

• Aug 16, 2010

• #2

Erm, that massive button in the middle of your console under the screen with a key/lock symbol on it?!?! press that, and guess what, you doors unlock! Genius!

Or if you want to be obscure, press the unlock button on your keyfob without having to turn engine off.

 

D

delisle

New Member

• Aug 17, 2010

• #3

I have found the big button for locking /unlocking but my car doesn't auto lock when I move. Can I active this feature by pressing an holding the button etc?

 

magictiny

New Member

• Aug 17, 2010

• #4

If it is like the BECM on the P38, you will need to program it into the BECM using the Testbook or Faultmate.

 

D

delisle

New Member

• Aug 17, 2010

• #5

Ah

 

mattstevenson2005

Active Member

• Aug 17, 2010

• #6

You have to enable it using a diagnostic tool, as it is a customer feature that a dealer can turn on or off

Matt

 

Datatek

Well-Known Member

• Aug 17, 2010

• #7

Auto locking is required for the American market, so presumably it can be enabled or dissabled in the BECM or the equivalent in the L322.

 

mattstevenson2005

Active Member

• Aug 17, 2010

• #8

Yes you can enable it as my L322 range rover has this feature enabled, when I go over 5mph the doors lock

Matt