nephro

Member

• Apr 16, 2016

• #1

Hi its me again. I need to change my front wipers on my 2005 Range Rover TDS 6

I have never seen a wiper fitting like this before, any one got any ideas how to proceed please ?

 

philip pickard

Active Member

• Apr 16, 2016

• #2

pic,s please. are they flat ended or hook clip or like mine disco ones on on a rangey from factory too.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 16, 2016

• #3

I changed mine a couple of years ago (now need replacing)

The fitting is relatively simple, there is a sliding lock, slide this up and then remove the blade, fit new blade into the groves and then slide the lock back down again...simples...

Might need to use a screwdriver is the lock has seized.

Extract attached.....

 

philip pickard

Active Member

• Apr 17, 2016

• #4

yes those are the ones on mine saint,v8 on my l322

 

nephro

Member

• Apr 18, 2016

• #5

They seam to be the same as mine, Thanks very much for the info. I have bought some off e-bay and should have them on Tuesday.
http://www.ebay.co.uk/itm/360919244512?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 18, 2016

• #6

I'd hope they would be the same considering the information was taken from the L322 handbook

 

philip pickard

Active Member

• Apr 18, 2016

• #7

those ones on ebay dont fit mine. ive found a place in rotherham that repair u js on the prop for l322
instead of buying new props

 

nephro

Member

• Apr 19, 2016

• #8

Wipers received today and fitted. All is well and they work perfectly.

Phillip you have to remove all the bits of plastic on the end of the wiper arm. There is a last bit of plastic which prevents the new wipers from fitting, remove every bit of plastic and they fit champion.