Do the emergency flashers still work?
If so I would swap over the flasher unit to the signal flasher to see if
it is just a dead flasher unit.
If not, then the main ground for them is the bolts on the fixtures,
Having all 4 grounds disappear implies the body of the Jeep has no
ground. The body ground is a mesh cable from the engine head to the
firewall.
If swapping the flasher doesn't work and you have ground, then the
signal switch inside the column is suspect.
Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
laxdad wrote:
>
> My 93 wrangler has a plow and recently the turn signals stopped working on
> both sides. All the lights and fuses seem good. Any ideas on how to
> remedy this? thanks
