wat

New Member

• Oct 20, 2008

• #1

offroading at the weekend and had a failed hill climb at the top i engaged reverse but when i released clutch it stalled the engine , i tried this a couple of times but the same happend each time when i finally got to bottom restarted and tried to pull waay and it woulnt move. tried high box with same effect and even tried neutral but every time i released clutch it stalled any ideas been told might be syncro lost a spring and wedged

 

mickdj

New Member

• Oct 21, 2008

• #2

i think its jammed between first and second try using third.

 

Landy-ads

Active Member

• Oct 21, 2008

• #3

If its a 2a gbox theres no synchro on 1st/2nd so it won't affect those gears, only 3rd and 4th

 

S

Smilemon

Member

• Oct 22, 2008

• #4

Is it making noises and stalling when you try to drive away? Try low range and 3rd gear.

 

tacr2man

Well-Known Member

• Oct 23, 2008

• #5

Have you tried moving in reverse, as you may have reverse engaged and will stall in all forward gears , sometimes happpens when doing frantic shift from fwd to rev and back HTSH

 

C

clivees

Well-Known Member

• Oct 23, 2008

• #6

Check you havent bust a half shaft and the bit in the end isint jamming the rear diff.