666 george · May 11, 2012

What do ya think ?
They cost me a whole £40 for the anodising the rest was knocked up at work.
I don't know how good they are yet cos I need to wire them up.
Each one is 50w but you can get 100w bulbs & the wiring is more than man enough for the job, I made sure of that.

hawky666 · May 11, 2012

They certainly look neat and tidy, but how difficult is it to adjust the beam angle?

666 george · May 11, 2012

They'll move up & down but not left & right, but even they one's they look like don't do that. Beside's they are never going to be used on the road anyway.

hawky666 · May 11, 2012

Cool.
I certainly like the neatness.

defender11069 · May 11, 2012

nice one mate

lanny man 90 · May 11, 2012

They look like the ones x eng sell

Good job

GINGE · May 11, 2012

Que. Dr Evil to tell us his are better

Oh look good by the way.

chunkymunky · May 11, 2012

Do lazer beams come out of them?

ratty · May 11, 2012

666 george said:
What do ya think ?
They cost me a whole £40 for the anodising the rest was knocked up at work.
I don't know how good they are yet cos I need to wire them up.
Each one is 50w but you can get 100w bulbs & the wiring is more than man enough for the job, I made sure of that.

Have you got any pics of em being knocked up?

wickford90 · May 11, 2012

666 george said:
What do ya think ?
They cost me a whole £40 for the anodising the rest was knocked up at work.
I don't know how good they are yet cos I need to wire them up.
Each one is 50w but you can get 100w bulbs & the wiring is more than man enough for the job, I made sure of that.

Looking good, did you decide where your going to run the wires.

damoyorkie · May 12, 2012

Very tidy. Well done, that man.

666 george · May 12, 2012

chunkymunky said:
Do lazer beams come out of them?

No not at the moment but that's cos you don't know what I do for a living. Laser's

Geoff, I ran them down the side of the snorkel but need to put them into the bulkhead yet.

666 george · May 12, 2012

ratty said:
Have you got any pics of em being knocked up?

No sorry, but I have a sketch of the sizes if you want.
The x-lite is made of tube but mine was solid & bored out so they can't come off the bar.

Ianski · May 12, 2012

nice , look a bit military, remind me of wot doc uses for looking into small orifices

1spin · May 12, 2012

cracking lights ...... think you should make these , plenty of people would buy , and i would be one of them

pressbrake · May 13, 2012

666 george said:
No sorry, but I have a sketch of the sizes if you want.
The x-lite is made of tube but mine was solid & bored out so they can't come off the bar.[/quote
Yours are much better I couldnt believe it when a customer turned up with x lights and the fitting kit was a jubilee clip which looks **** and moves.
well done

Pikey · May 13, 2012

Nice lites & I've always said the X-Lites were a rip off and poorly made ****e..

Igloo · May 13, 2012

Did you make the lights too or buy them?

Pikey · May 13, 2012

Igloo said:
Did you make the lights too or buy them?

He made em??

666 george · May 13, 2012

Made the whole lot. Bar, mount's & spot lights. All hard anodised.
Not hard when you know how.

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

AKA Mr cool...

Well-Known Member

Greenlane liker, bobble hat hater

New Member

I'm not special I'm limited edition

Well-Known Member

Member

Well-Known Member

Well-Known Member

New Member

New Member

Well-Known Member

Dummy Ejection Facilitator..

New Member

Dummy Ejection Facilitator..

Well-Known Member

Similar threads