Alright guys please can I get some help if possible.

Just got round to fixing the rear sensor wire loom, so on to next issue lol. The reverse camera works but has some issues. It has no on screen grid or any other graphics even after fixing the sensors (facelift HSE) the image also appears to be reversed with no error codes that my reader can pick up. I have seen a few posts on other forums from long time ago that and Land rover appears to have changed the camera unit and sort of fixed it but its hit and miss as others also say did not fix it or stopped working again after a short time. I have had a look at the service manual and it says that the single camera is just a dumb camera, the grid and other graphics are according to manual generated via the camera module. I wonder if anyone has had the same issue and if so did they manage to fix it. I would assume it is either the camera or the camera module (neither cheap even on Ebay) but knowing my luck would end up getting wrong part lol. So anyone any ideas would be a great help, will live with the reverse image for now.

Cheers guys
 
Alright guys please can I get some help if possible.

Just got round to fixing the rear sensor wire loom, so on to next issue lol. The reverse camera works but has some issues. It has no on screen grid or any other graphics even after fixing the sensors (facelift HSE) the image also appears to be reversed with no error codes that my reader can pick up. I have seen a few posts on other forums from long time ago that and Land rover appears to have changed the camera unit and sort of fixed it but its hit and miss as others also say did not fix it or stopped working again after a short time. I have had a look at the service manual and it says that the single camera is just a dumb camera, the grid and other graphics are according to manual generated via the camera module. I wonder if anyone has had the same issue and if so did they manage to fix it. I would assume it is either the camera or the camera module (neither cheap even on Ebay) but knowing my luck would end up getting wrong part lol. So anyone any ideas would be a great help, will live with the reverse image for now.

Cheers guys
Is the a setting to switch the image around?
 
Hi

Have u also tried a hard reset and got any diagnostics plse , if so what errors are coming up as sometimes if there are error codes it can lock out some modules until the error is cleared

plus plse ensure u battery with the engine off is reading a min of 12.6 Vdc , if it’s low the ECM will start to disable modules / radio,, sat nav etc

Hope that also helps
 
1684052931610.jpeg
 

Similar threads