K

Knobblywobbly

New Member

• Jul 16, 2010

• #1

I need to get a couple of thin wires from the engine bay into the passenger cabin, preferably on the drivers side. Is there any simple way to do this, i.e. are there any existing routes which can be followed easily?

Thanks

 

Missing Link

New Member

• Jul 16, 2010

• #2

The RAVE disk has a section on fitting optional extras which include running cables as you require. This is quite useful as it incudes diagrams

 

Optimus Prime

Well-Known Member

• Jul 16, 2010

• #3

there is a grommet which is do-able drivers side, hard to explain, but it is do-able, the main grommet with all the cabling is a no go as it's jammed tight

 

K

Knobblywobbly

New Member

• Jul 16, 2010

• #4

Missing Link said:

The RAVE disk has a section on fitting optional extras which include running cables as you require. This is quite useful as it incudes diagrams

Click to expand...

Unfortunately my RAVE disk has just gone belly-up!!! Any chance of posting the relevant page please?

 

2.0_hippo

Well-Known Member

• Jul 24, 2010

• #5

the front right side of the engine bay has a couple of spare unused cable entrys into the cabin, i used these then just run the cable to the drivers side once in the cabin.