Otto

New Member
Rear washer: - The rear washer on my 110 wouldn’t work, stripped it out and checked the connections, all seemed OK, replaced in the rear door. Surprisingly when the ignition was switched back on it worked for about 30 seconds, I then turned the switch off, turned back on and nothing. Any pointers would be appreciated.
Regards
Otto
 
check there is water in it :D

Also check all the fuses, and check the wires that go into the door, where they flex all the time they have probably fractured, your playing with them made them work OK, but with a poor connection its probably failed again.
 
Went to work in the 110 this morning and pressed for the rear wash, it worked, and has worked thoughout the day, fingers crossed it had just silted up, it has been standing for some time.
Thanks to all replies.
Otto
 

Similar threads