Bizgsi New Member Sep 17, 2013 #1 As above any ideas on how to remove this, as I'm starting to get the hump with it big time, cheers
M matt1295 New Member Sep 17, 2013 #2 I used to small pry bars exactly opposite each other than prye them out I found if there not opposite each other it wouldn't come out
I used to small pry bars exactly opposite each other than prye them out I found if there not opposite each other it wouldn't come out
P Petoors New Member Sep 17, 2013 #3 I used a nice big flat screw driver, wedged between the cup and the gearbox, and turned it, popped right out, beware the oil spilling out if the car is driven warm before removing!
I used a nice big flat screw driver, wedged between the cup and the gearbox, and turned it, popped right out, beware the oil spilling out if the car is driven warm before removing!
Nodge68 Well-Known Member Sep 17, 2013 #4 A bolster chisel each side will work if the CV refuses to budge
Bizgsi New Member Sep 17, 2013 #5 Thanks for the advice I will give it a try later, if not I'm going to rip it out with my disco lol
Bizgsi New Member Sep 18, 2013 #6 Thanks for the help got it out, went to put new shaft in and blood Motor parts given us the wrong 1 arrrrrhhh
Thanks for the help got it out, went to put new shaft in and blood Motor parts given us the wrong 1 arrrrrhhh
