M

Markps1

Member

• Nov 21, 2015

• #1

hi is there anyone close too haydock who has an injector puller/slide hammer i can hire please
or no anywhere i can hire one
need to remove injector no4 from my td6 its all stripped down ready
so hopefully if its not seized in too badly wont need it long

 

ER1C

Well-Known Member

• Nov 21, 2015

• #2

Have you seen one ?

Easy enough to make...

 

M

Markps1

Member

• Nov 21, 2015

• #3

Was looking into making one but dnt know the thread size for a bar too screw into injector, pus were too get threaded bar also i dnt have any decent bits of metal plate hanging around to knock anything else up

 

ER1C

Well-Known Member

• Nov 21, 2015

• #4

Not sure on the thread size but google can give you that. You don't need the threaded bar, just a nut welded onto a long bolt, or anything like a bar/massive nail with a socket on it would do.

I know its not ideal but the chances of finding someone close enough are zip. Or you could try and find an injector refurbisher, if you convince them you will bring the injectors in to them they will loan you the slide hammer.

 

M

Markps1

Member

• Nov 21, 2015

• #5

im doing it from home dnt have a welder no decent size bolts or nail,and to be fair i butchered the old injector as i snapped the plastic on the top lol,
not really messed with cars for a long while i had a garage full of stuff years ago but not any more.

 

Dippypud

Never Knowingly Understood

Full Member

• Nov 21, 2015

• #6

Slide hammer modded ...

 

M

Markps1

Member

• Nov 22, 2015

• #7

Out she pops

 

P

Pete The Biker

Active Member

• Nov 22, 2015

• #8

Neat! Well done!

 

M

Markps1

Member

• Nov 22, 2015

• #9

Too be fair it worked really well put some stress on injector few taps with hammer and it started coming