B

BENISUTTON84

New Member

• May 8, 2018

• #1

Hi guys, new to the forum but not new to rusty defenders.

Not sure if I'm posting in the right place but I have a problem with a broken plug on my main wiring harness. It's the plug that plugs into the injector loom and is part of the main harness.

Does anyone know where I could get a replacement plug or anyone who could replace it for me? Don't want to replace the whole loom for the sake of one broken connector.
I've attached a photo of the plug.

Thanks Ben

 

Attachments

• 
  post-209-1200990956.jpg

  195.8 KB · Views: 164

tom1979

Well-Known Member

Full Member

• May 8, 2018

• #2

Is it definitely broken? I thought mine was broken a while ago and it was just the injector loom side that was knackered, the main engine loom plug was fine

Edit: the pic has just loaded - it doesn’t look broken?

 

B

BENISUTTON84

New Member

• May 8, 2018

• #3

It's definitely broken, it crumbled. The photo is one I found on Google. All I have left is 7 or 8 wires

 

tom1979

Well-Known Member

Full Member

• May 8, 2018

• #4

You can get second hand looms quite cheap, I got one for £25. Just cut the plugs off you need and join then onto your loom. New looms are fairly dear but not a major job to change

 

B

BENISUTTON84

New Member

• May 8, 2018

• #5

Been looking at second hand an new looms. Was thinking about going down the whole new loom route but was worried about it being a pain in the arse to change

 

tom1979

Well-Known Member

Full Member

• May 8, 2018

• #6

It’s worth taking your time but it’s one of the better jobs.