Steviecops

Active Member
Full Member
1997 discovery 300tdi manual gearbox.
Reading the Haynes manual about injection pump timing and it mentions the injection spindle locking screw. There's a diagram in the manual, but on my injection pump, the screw/bolt isn't where it shows in the manual. The disco manual only goes up to N Reg, but mines a P Reg. Any idea where the locking screw might be?
 
Ah right, thanks. Apart from the licking pin and three pulley bolts, is there a similar method of timing the 300 tdi pump?
 
Are you sure you have the right Haynes manual for a 300tdi?
Have you downloaded the rave manual?

Cheers
 
Yes, the Haynes manual is for all discovey 1's, but only up to N Reg. There isn't a newer manual.
I had the rave manual on my old PC, which is now with my ex wife! Lol
Ill have to download it again if I can find a link.
 
Your manual maybe for a 200, does it show the engine having 2 'V'' belts for alternator / power steering pump / water pump / fan etc or just a singe ribbed belt (300)?
 
300 pump (with added EGR gubbins)
upload_2017-2-13_22-27-49.png

200 pump
upload_2017-2-13_22-31-14.png
 
Last edited:

Similar threads