Thanks for the response, not yet that’s my next job.
Just disconnect the hazard switch and the indicators didn’t work?
Thank you, busy Christmas then lol
Yes the landy has LEDs but I didn’t install them. Might be worth buying a new hazard switch then as well?
dag019
Well-Known Member
If you have LED's fitted that is a very different issue. As @nobber has said it will be a bleed through form the dash panel warning light. It is a very common problem and seems not all LED indicator relays work as they are supposed to. From what I have picked up from other LED indicator threads changing the relay for one of the better quality LED flasher relays tends to solve the problem. It might be worth having a search on the forum for LED indicators, there are lots of threads about the issues that come with them if they are not installed correctly with the correct parts. It is on my list of things to do to mine as I rebuild it but for now I am keeping the indicators original and just changing everything else to LED.
LED's change everything ..... It'll be the green lamp that flashes on the dash .... https://www.ebay.co.uk/itm/283630040556
Ok thank you, will try this first save me stripping the landy down.
I found this, for me anyway, was poor. It solved the flashing issue, but the LED warning light was too dim to be useful. I also ran all new earths for everything - I still got the crossover flashing.
So in the end I put a 20 Ohm, 20Watt, Ceramic resistor on each side circuit, installed in the RHS rear (since that has wiring for both sides in it) : https://www.ebay.co.uk/itm/265132275815?var=565013098487
Job Jobbed.
Thank you, well hopefully when it arrives I will see what happens. The earths all look good to be fair. But will see once this part is put on.
