Can't help I'm afraid, but if you do get confirmation, please do post back on here.

I fancy a Parrot kit, but none of the fitters/installers I've spoken to want to go near the Becker/Harmon Kardon kit because of the added complication of the external amp.
 
I decided to replace the head unit instead. I had fitted a Kenwood KDC 73DAB 1DIN unit. It was a straight plug in job.

It has BT audio, DAB, FM, iPod, USB front & rear and aux in as well as phone mode. I can also use Siri on my iPhone to voice dial. Great bit of kit. Recommended. Much better than the Becker head unit.

I then bought a Tom Tom for sat nav and hard wired it in by piggybacking off a switched live. (My previous car had sat nav built in)

My only problem is I can't find a lead for the steering wheel controls for mine.

I also have a '06 HSE TD4 auto with the Harmon Kardon/Becker set up.

My sub woofer has blown and the rear o/s large speaker isn't working. Not checked to see why yet.

I have removed the subwoofer and have much more room in the underboot storage now.
 
Im trying to find out what lead I would need to connect my Becker Traffic pro & Harmon Kardon system in my HSE - to a Parrot MKI9200 bluetooth system. Does anyone know the correct type of ISO cable that I would need?
I have found this one: http://www.discountcarstereo.com/images/P/bt-bkrnov_m.jpg

Is this the type, or am I looking at the wrong one?

Try these people

http://incartec.co.uk/landrover/1512/1033/2047/radio/Browser.aspx

I have just sourced a steering wheel audio control interface from them for my Becker/Harmon Kardon system. I ditched the Becker part for a Kenwood head unit.

I emailed them and they came back to me quite quickly.
 

Similar threads