British Leyland Rover

Active Member
I'm nearing the stage of fitting these interior door cards and would like to know how people have attached them.
The plastic fir tree clips seem like they might be the easiest way.

Any advide greatly appreciated, thank you.
1000044082.jpg
 
sticky tape - to get it into place and stay there.

1 off 3mm HSS drill - drill 4 holes 1 in eash corner.
A pack of these screws ... 1000 maybe overkill, small packs and different sellers are available.

A piece of chalk/white marker pen and a rule - to mark out equally spaced points in straight lines.
Step back and check how it looks.
Drill as marked.
Remove the 4 corner screws and tape.
Paint the holes with Galvafroid (or similar) and let it dry.
Screw into place.

Drink tea, admire your neat work, do a little dance (last item is optional but good for the soul).
 
sticky tape - to get it into place and stay there.

1 off 3mm HSS drill - drill 4 holes 1 in eash corner.
A pack of these screws ... 1000 maybe overkill, small packs and different sellers are available.

A piece of chalk/white marker pen and a rule - to mark out equally spaced points in straight lines.
Step back and check how it looks.
Drill as marked.
Remove the 4 corner screws and tape.
Paint the holes with Galvafroid (or similar) and let it dry.
Screw into place.

Drink tea, admire your neat work, do a little dance (last item is optional but good for the soul).
Great tips thanks.
 

Similar threads