W

Wimorrison

New Member
After many years of longing for a LandRover I have finally purchased one but it needs some TLC - luckily I spent 20 odd years keeping them going whilst in the Army and I am glad to say that with the exception of the engine much remains the same :)

I need to reprint the toy and have found the colour, Caledonian Blue, but what I can't work out is how much I need - nor what I should use as an undercoat.

There are some bits that are bare ally, should I prime these then use a general undercoat, what type of primer and what is the best undercoat?

I think that cellulose paint is best for an amateur, and Carpaint can mix it, but I don't know how much I will need :( and do I need to thin it down before spraying?

Can someone give a newbie here an indication of what the coverage is for these paints please?

Many thanks - all tips gratefully accepted!!

Iain
 
wiltshire landyman said:
its been coverd and answerd about 25,000 times try a search on ere and all the info can be found
Click to expand...

I had expected a more helpful answer than you provide. Try searching on here using an iPad, then you will realise how 'helpful' your answer actually is.

I can only hope that there are others here who show the friendliness and support that the Landrover community is renowned for.
 
Wimorrison said:
I had expected a more helpful answer than you provide. Try searching on here using an iPad, then you will realise how 'helpful' your answer actually is.

I can only hope that there are others here who show the friendliness and support that the Landrover community is renowned for.
Click to expand...

Mines more accurate :p
 
Wimorrison said:
I had expected a more helpful answer than you provide. Try searching on here using an iPad, then you will realise how 'helpful' your answer actually is.

I can only hope that there are others here who show the friendliness and support that the Landrover community is renowned for.
Click to expand...
sorry how stooped of me to think that were using an ipad I should have consulted my crystal ball first please accept my humblest apologies















































not
 
Last edited:
wiltshire landyman said:
its been coverd and answerd about 25,000 times try a search on ere and all the info can be found
Click to expand...

Wimorrison said:
I had expected a more helpful answer than you provide. Try searching on here using an iPad, then you will realise how 'helpful' your answer actually is.

I can only hope that there are others here who show the friendliness and support that the Landrover community is renowned for.
Click to expand...

That's told you wiltshire landyman, but what the #### is an iPad????????????
Wimorrison;2398087 yer a pratt first order, :rolleyes::rolleyes::rolleyes:
 
No problems doing a forum search on my iPad!
If you get a tin, the base of which completely covers your iPad, and stands about 30cm high, you will have enough!
Alternatively, you could buy a gallon of paint and have sufficient.
Use a catholic primer ... Or a zinc-based etching primer, then a grey etching undercoat, followed by gently rubbing down between layers, finally slap on your topcoat.
Simple!!




See, some of us are kind to higgeruntnunt prats!
 
Oldseadog said:
No problems doing a forum search on my iPad!
If you get a tin, the base of which completely covers your iPad, and stands about 30cm high, you will have enough!
Alternatively, you could buy a gallon of paint and have sufficient.
Use a catholic primer ... Or a zinc-based etching primer, then a grey etching undercoat, followed by gently rubbing down between layers, finally slap on your topcoat.
Simple!!
Click to expand...

question answered,not difficult is it?
 
You must log in or register to reply here.

Similar threads

hawky666
What door card type do i need?
Replies
7
Views
473
miktdish
miktdish
M
Freelander 1 VCU off for car how to test
Replies
2
Views
334
GrumpyGel
GrumpyGel
J
Disco 1 Making brake pipes, what supplies do I need?
Replies
5
Views
753
Anaconda
A
BTD1
Paint Code + selling price help!
Replies
11
Views
901
BTD1
BTD1
Becks Bear
Defender V8 3.9EFI manual to automatic
Replies
6
Views
2K
discool
discool