RRC83
Member
My temp gauge is showing some intermittent readings when driving, sometimes it's in the middle and a few minutes later it's near the red zone.
I decided to install a watertemp gauge instead of the clock and put sensors in the top and bottom hose.
After bleeding the system and fully warm the gauge shows close to 100 at the top and 60 ish at the bottom.
Rad, fan, viscous and pump are all new.
Being new to these engines, would petrol quality make these run hotter than normal? I filled up with 95, does it require 98?
Regards,
Rob
I decided to install a watertemp gauge instead of the clock and put sensors in the top and bottom hose.
After bleeding the system and fully warm the gauge shows close to 100 at the top and 60 ish at the bottom.
Rad, fan, viscous and pump are all new.
Being new to these engines, would petrol quality make these run hotter than normal? I filled up with 95, does it require 98?
Regards,
Rob