C

cfwnotloB

Well-Known Member
how easy is it to change the cup holder - ash tray - coin tray assembly on a 2001 TD5
mine are totally foo-bared and a set on fleabay for reasonable money

so if its an easy - ish job might be worth the effort
another thing to put right on the road to an original working landyo_O
 
cfwnotloB said:
how easy is it to change the cup holder - ash tray - coin tray assembly on a 2001 TD5
mine are totally foo-bared and a set on fleabay for reasonable money

so if its an easy - ish job might be worth the effort
another thing to put right on the road to an original working landyo_O
Click to expand...

Its extremely difficult, you will require a fully equipped workshop, ramps, and heavy lifting gear, and a team of fully qualified technicians! :rolleyes:

If you really can't work that one out, get a Daewoo, they have seven year free dealer servicing.
 
Turboman said:
Its extremely difficult, you will require a fully equipped workshop, ramps, and heavy lifting gear, and a team of fully qualified technicians! :rolleyes:

If you really can't work that one out, get a Daewoo, they have seven year free dealer servicing.
Click to expand...
so its a big job then :eek:

not looked into how it all goes together which was why i asked :(

but thanks for your informative answer I will now sell the Disco and buy a Daewooooooooooooooooo o_O
 
neilly said:
Give me two weeks and I will go take mine out and do a "how to" for you............

Cheers
Click to expand...
I aint got 2 weeks to wait:mad: ----- Auction ends in 4 days:eek: - plus postage wait, it will be here in 8 days o_O
Can you do the tutorial a bit sooner :rolleyes: then I nose wot to do proper like

found the rave details - will have a go tomorrow as i now know all it takes is 'remove 6 screws' just wondered why there were prison officers i my dashboard:confused:
 
cfwnotloB said:
I aint got 2 weeks to wait:mad: ----- Auction ends in 4 days:eek: - plus postage wait, it will be here in 8 days o_O
Can you do the tutorial a bit sooner :rolleyes: then I nose wot to do proper like

found the rave details - will have a go tomorrow as i now know all it takes is 'remove 6 screws' just wondered why there were prison officers i my dashboard:confused:
Click to expand...

Take the whole unit out carefully ... do NOT try to take the cupholders from their frame ... it's all one unit ...
 
There are 3 screws tucked in behind the ash tray and coin tray...
The springs do quite often dislodge, but sometimes the small plastic tab breaks...the Disco 1 and 2 are the same type ...
 
cfwnotloB said:
bit late for that:( cup holders are in the same place as when I bought it -- the glove boxo_O
Click to expand...

They can be got back in ... so I'm told ... by someone with the patience of Job and four hands ... check the springs and tabs are ok tho ...
 
You must log in or register to reply here.

Similar threads

styleruk
Dash repair
Replies
6
Views
211
Dippypud
Dippypud
Vtechjoe
How easy is it to change both the Valve seals and Piston Rings
Replies
3
Views
1K
300bhp/ton
300bhp/ton
DanClarke
P38A How easy is it to...
Replies
10
Views
1K
Datatek
Datatek
dag019
How to test a brake servo and master cylinder
Replies
1
Views
1K
tottot
tottot
D
Disco 2 Rusty front suspension woes
Replies
10
Views
2K
Andy Warren
Andy Warren