storm99

Spreading Joy & Harmony

• May 13, 2013

• #1

Reet...seeing as these are rarer than hens teeth used on ebay and i have a massive drug habit to feed, has anyone got the dimensions i'd need to make a snorkel for a 200tdi D1?

And what is the choice of pipe? Metal v Plastic?

Ta

 

S

Steve_R1979

Active Member

• May 13, 2013

• #2

storm99 said:

Reet...seeing as these are rarer than hens teeth used on ebay and i have a massive drug habit to feed, has anyone got the dimensions i'd need to make a snorkel for a 200tdi D1?

And what is the choice of pipe? Metal v Plastic?

Ta

Click to expand...

I've got a snorkel, or part of, from an RRC if you want it.....you just have to come get it or get it relayed it to you!!!

 

MPfive

Active Member

• May 13, 2013

• #3

I put one off a 90 on mine. Used a bit of drain pipe for inner wing and a bit of flexy to get to airbox. I think it was 2 3/4"

 

wiltshire landyman

I’m back

• May 13, 2013

• #4

drainpipe with a plant pot on top will be cheap as cheaps from b&q

 

haigy

Well-Known Member

• May 13, 2013

• #5

I used a 63mm stainless steel pipe for the a post with a drain pipe elbow on.then a night heater entry grill for stoppjng leaves getting sucked in.

Flexi for the inner arch then to the air box.

Jobs a gd un

 

haigy

Well-Known Member

• May 13, 2013

• #6

I used a 63mm stainless steel pipe for the a post with a drain pipe elbow on.then a night heater entry grill for stoppjng leaves getting sucked in.

Flexi for the inner arch then to the air box.

Jobs a gd un

 

nathan5346

Well-Known Member

• May 13, 2013

• #7

Remember this?

The plastic clips were crap, couldve done with summat stronger

http://www.landyzone.co.uk/lz/f37/homemade-snorkel-115073.html

 

storm99

Spreading Joy & Harmony

• May 13, 2013

• #8

Excellent recall Nathan...i may have a ready made one o the way though...if not, i shall be at B&Q later this week!

 

wiltshire landyman

I’m back

• May 14, 2013

• #9

or stop being a tight arse and buy a proper one