C

Cutchy

New Member

• Aug 4, 2011

• #1

Hi all!
Just bought myself a 90 truck cab.
Going to change the universal joints on the rear prop shaft tomorrow, is it an easy enough job?

Looking forward to meeting to some new people

 

Beneagles

Well-Known Member

Full Member

• Aug 4, 2011

• #2

:welcome2:

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Aug 4, 2011

• #3

easy enuf to do. read Busters guides.

 

crashbox

Well-Known Member

• Aug 4, 2011

• #4

Lying on your back with bits of rust, mud and oil falling on your face, while trying to undo the bolts, yes easy enough but can be frustrating. Just take care when you throw the spanners down to the bottom of your garden in frustration. Soak the nuts/bolts in WD40 first and ensure the correct fit of spanners. Some of the lock nuts will round off so have a supply of spares. Good luck...oh yes, Welcome to the nut house.

 

C

classicseverywhere

New Member

• Aug 4, 2011

• #5

Yep then when you get the prop off the fun starts ,make sure new rollers are held with plenty of thick grease ,Good luck.

 

C

Cutchy

New Member

• Aug 4, 2011

• #6

Thanks guys, al write down all the swear words said and repost the results tomorrow haha

 

landy1uk

Well-Known Member

• Aug 5, 2011

• #7

:welcome2:

 

C

Cutchy

New Member

• Aug 6, 2011

• #8

Well got the joints done on fri night without too much difficulty had a rounded nt on the flange so put a whole new shiney set on! Driving like a dream