A

Allan2a

New Member

• Sep 24, 2013

• #1

Ok so I'm new and have a massive job to undertake on my series 2a. I am putting a 2.5 300tdi engine in it. (I understand that the 2.5 is harder to fit then the 2ltr however the 2.5 will last longer and is superior to the smaller 2ltr.) I have brought the engine but no local garages will do the job! (Claiming they don't know how, and it wouldn't be worth it for them) So I need help and advice on where would be the best place to take it to, to get a competent job done. I live on the coast of Norwich.

Not sure if this is the correct place for the question. Thanks.

 

Oldseadog

Well-Known Member

• Sep 24, 2013

• #2

What's wrong with the 2ltr? If it is looked after it will probably outlast any other later engine!

If you do wish to go ahead, it isn't as big a job as a lot of people think, although you will have to do a number of mods to put the tdi lump in.

Do you have tools?

Can you weld?

Do you have somewhere to carry out the work?

 

A

Allan2a

New Member

• Sep 24, 2013

• #3

I have just read in landrover mags, that the 2.5 tdi is more reliable and favoured over the 2ltr.

I have the space to do the works (inside aswel) just not the knowledge.

I have most tools, but not all. (As in no hoist to lift the block out)

I can't weld.

 

Dr_evil

Banned

• Sep 24, 2013

• #4

you'll need to learn how to weld….

 

A

Allan2a

New Member

• Sep 24, 2013

• #5

Dr_evil said:

you'll need to learn how to weld….

Click to expand...

But my question is where can I take it to get the work done?

 

Dr_evil

Banned

• Sep 24, 2013

• #6

to a garage that knows landrovers

 

B

barleywine

Well-Known Member

• Sep 26, 2013

• #7

Hi, don`t know how close you are to Thetford. but you could have a look here.
Untitled

Very helpful when I called.

 

A

Allan2a

New Member

• Oct 4, 2013

• #8

Thanks barleywine I rang the theftford garage and he is very helpful, so taking it there.