pete12345 · Apr 2, 2020

think it's time for new brakes & calipers not sure about new wishbone as can't undo anything will try again tomorrow after had good soaking in penatrating oil but am aiming to replace most of the parts over time underneath as cars of the rd now on a sorn as always any suggestions much appreciated as complete novice

tarphenry · Apr 2, 2020

There are no "wishbones". Which pieces can you not undo?

pete12345 · Apr 2, 2020

The calipers or the holders what's the main joint called then that they bolt to

Mark Piercy · Apr 2, 2020

Hub carrier?

brianp38dse · Apr 2, 2020

Front drive hub i would have thought.

tomcat59alan · Apr 2, 2020

Front swivel hub carrier? Big lump to be technical

pete12345 · Apr 2, 2020

Mines looking proper rusty so may have to replace it aswell

tomcat59alan · Apr 2, 2020

pete12345 said:
Mines looking proper rusty so may have to replace it aswell

Clean it up and save your money for the next problem

pete12345 · Apr 2, 2020

Yer I will once it's all striped down will see what condition it's in and clean it up

RangeRoller dt · Apr 2, 2020

You will be surprised how well they will clean up they are HD as they come pretty much
don’t look too bad fella.
Is nice therapy if your looking for a project.

kds · Apr 3, 2020

pete12345 said:
View attachment 204368 View attachment 204369 View attachment 204370 View attachment 204371 think it's time for new brakes & calipers not sure about new wishbone as can't undo anything will try again tomorrow after had good soaking in penatrating oil but am aiming to replace most of the parts over time underneath as cars of the rd now on a sorn as always any suggestions much appreciated as complete novice

And there`s no need to undo that big nut thing your sockets on to do the brakes.

pete12345 · Apr 3, 2020

Cheers kDs I just put it on there not to loose it again will need it later doing bearings

tomcat59alan · Apr 3, 2020

RangeRoller dt said:
You will be surprised how well they will clean up they are HD as they come pretty much
don’t look too bad fella.
Is nice therapy if your looking for a project.

You could give him some blue paint for it if you have any left.

pete12345 · Apr 3, 2020

That's the last job to be done after all the work I'm going to do respray

RangeRoller dt · Apr 3, 2020

tomcat59alan said:
You could give him some blue paint for it if you have any left.

Orange is nice...

tomcat59alan · Apr 4, 2020

RangeRoller dt said:
Orange is nice...

Won't it clash with your starter motor?

RangeRoller dt · Apr 4, 2020

That starter I sprayed blue when I rebuilt it died and is replaced with OE coloured one. Do intend to do callipers, coils and few more bits orange to suit the theme

pete12345 · Apr 5, 2020

Managed to salvage one peice from under the front the bit the drop links hang from sorry don't know it's name and couple of track rods to replace and steering damper

pete12345 · Apr 5, 2020

Any suggestions for paint and metal protection would be helpful

pete12345 · Apr 5, 2020

I've got one more bar at the front to get off I think it's the one that goes to the steering box but I haven't got a spanner that size and the nut seems to be protected by a small bit of metal over it fixed to the bracket any help with spanner size be good

Well-Known Member

Well-Known Member

Well-Known Member

Well fumbled member....

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Sprung Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads