smckeown73

Active Member

• Jun 20, 2013

• #1

I'm totally confused with regards to where the washers go, based on what ive taken off, what's provided by procomp and the video ive seen on youtube. For a starters the video suggests in between both bottom rubber buses, there's a metal cup either side. Well I dont have enough washers for that.

Also the exact sequence for the metal barrel is a mystery

Here's a pic of what I have currently. The old washers are from both sides combined, the new ones are for one side.

Help appreciated..
Sean

 

jamesmartin

Well-Known Member

• Jun 20, 2013

• #2

washer tube with rubber bush bracket bush and washer id think though normally i fit 4 washers and no tube

 

smckeown73

Active Member

• Jun 20, 2013

• #3

I think the vid confused me with a cup / washer either side of both rubber bushes. Surely below is the correct way, the gap being where its mounted to the bottom mount, with the barrel being pointless:

 

smckeown73

Active Member

• Jun 20, 2013

• #4

This spring doesnt seem right either...not having a good night of it..

 

ratty

I'm not special I'm limited edition

• Jun 20, 2013

• #5

smckeown73 said:

This spring doesnt seem right either...not having a good night of it..

Click to expand...

I find it easier changing the rear springs without using spring compressors.

 

smckeown73

Active Member

• Jun 20, 2013

• #6

Fitted now. I suppose lowering the axle so much without dampers fitted made it look wierd. Sorted now...hopefully...

 

ratty

I'm not special I'm limited edition

• Jun 20, 2013

• #7

smckeown73 said:

Fitted now. I suppose lowering the axle so much without dampers fitted made it look wierd. Sorted now...hopefully...

Click to expand...

Nice one