Happy Easter!

Spot of advice required please. I am fitting a wired revering camera to the Freelander 1 today. (2004 TD4)
I have spent most of the morning looking for a how to, I am fine with the wiring, its the routing that is concerning me. I will mount the cam under the rear door handle and route the cable through the rear door. It is from this point forward I am stuck. What is the best route for feeding the camera wires through the interior and into the back of the dash?

Rather than pull every panel out, I was hoping someone might have prior experience and be able to offer some pointers. Thanks in advance.

Have you been having internet connection problems?

A decade between posts! Still the same motor?

Sorry can't help - there have been threads though about routing CB aerial wires through the cabin from the back.

GrumpyGel said:

Have you been having internet connection problems?

A decade between posts! Still the same motor?

Sorry can't help - there have been threads though about routing CB aerial wires through the cabin from the back.

Click to expand...

Ahh man, I was hoping that would go under the radar. I've never missed a car so much as the Freelander. I sold the last one because it was the 2.5 V6 and the bank said if I didn't then they would ban the use of my debit card in all petrol stations. Only recently picked up the TD4, loving it. I will look up the cb stuff, ta!

Thread it thro under the carpet

Just run the cable along the threshold plates with all the other wires to the rear.