Codbasher
New Member
Wheelbearings on my series 3 as par all of em are held in by a washer, nut, lock washer and a nut.
On mine the outer nut has a sleeve on it with a slot cut into the sleeve, that will line uo with the part of the hub (The outer bit thats held on by 5 bolts) On my hubs there are no lock/unlock things.
What I desperately need is the outer nut with the sleeve on. If anyone can help, or point me to someone who would stock this part (No joy with usual Padds Cradds etc)
This is one of the nuts that hold the bearings in, NOT the castelated one with a split pin...
TIA
Coddy
On mine the outer nut has a sleeve on it with a slot cut into the sleeve, that will line uo with the part of the hub (The outer bit thats held on by 5 bolts) On my hubs there are no lock/unlock things.
What I desperately need is the outer nut with the sleeve on. If anyone can help, or point me to someone who would stock this part (No joy with usual Padds Cradds etc)
This is one of the nuts that hold the bearings in, NOT the castelated one with a split pin...
TIA
Coddy