georgeruth552 · Mar 4, 2018

Am fitting my new skimmed head on my landrover v8. I Put the bolts in to make sure threads were ok one bolt came out with metal in the bolt so whats the best way to fix this . Is it with a helicoil kit (will it be strong enough when torque down ) or will it be better to just retap the thread and bolt .any help would be much app thanks

listerdiesel · Mar 4, 2018

When you say metal came out with the bolt, do you mean that the bolt tore the thread and dislodged material as you pulled it out, or that it just had minor traces of metal on the bolt?

If the bolt was tight in and out, suggest you check the bolt itself for damage. Any bolt that doesn't spin down by hand is suspect and shouldn't be used.

I clean my threads out with a tap before I assemble the heads.

Peter

jamesmartin · Mar 4, 2018

georgeruth552 said:
Am fitting my new skimmed head on my landrover v8. I Put the bolts in to make sure threads were ok one bolt came out with metal in the bolt so whats the best way to fix this . Is it with a helicoil kit (will it be strong enough when torque down ) or will it be better to just retap the thread and bolt .any help would be much app thanks

a long helicoil type thread repair

georgeruth552 · Mar 5, 2018

jamesmartin said:
a long helicoil type thread repair

Thanks would this do the trick would it be strong enough

jamesmartin · Mar 5, 2018

georgeruth552 said:
Thanks would this do the trick would it be strong enough

more than if done properly the thread is stronger than the original, they are used in ali castings during manufacture were a strong thread is needed

georgeruth552

Member

Attachments

listerdiesel

Well-Known Member

jamesmartin

Well-Known Member

georgeruth552

Member

jamesmartin

Well-Known Member

Similar threads