landy-lee

Well-Known Member
Good morning all.

So after months and months of tinter web searching i have found 2 door RRC project car!!

The help i need from you guys is building my knowledge on the axles.

The car is a 1982/1983 build year. My plan is to first rebuild the axles but i will be going to 24 spline axles with a ATB in the front.

Can i fit the 300Tdi swivel balls to these axle casings?

If you would like to have a look at my last build here is the link Defender 110

https://www.landyzone.co.uk/land-ro...the-ultimate-overlander.366691/?_params=Array
 
Unsure of the axles. But If you changed the complete ends you would be fine. You may need to upgrade to later callipers to match newer parts.


but need at least a photo before you start of the RRC would be nice ;)
 
Unsure of the axles. But If you changed the complete ends you would be fine. You may need to upgrade to later callipers to match newer parts.


but need at least a photo before you start of the RRC would be nice ;)

Cheers for the info!

The car will be with me next week and i will upload some photos for ya
 

Similar threads