HI all, just a quick one, can anyone assist with identifying the pulley that the arrow is pointing at on the attached photo, mines a bit wobbly so any advice on replacing etc would be welcome too
PAS pump as said above. If the 3 bolts are tight then it could indicate the pump bearings are worn. They tend to do quite well as the back end is full of PAS fluid but they do fail eventually.
Cheers guys, probably failing, ive also noticed that when wading the power steering goes a bit funny so suspect its linked! Happy days 2 birds one stone!
Cheers guys, probably failing, ive also noticed that when wading the power steering goes a bit funny so suspect its linked! Happy days 2 birds one stone!