Cat's Eyes
New Member
Hi just joined and wanted to say "Hello" 
Cat's Eyes
New Member
Take5 said:Welcome mate. We're a bit goofy in here at times, but the technical help is there if you dig through the off-the-wall humour
Yes, so I am finding out.
thanks for the welcome.Maria.
Cat's Eyes
New Member
Hello Grunt
Northern Irelander
Well-Known Member
Hello cat's eyes, hope you find the forum useful
Dave (N.I.)
Dave (N.I.)
Cat's Eyes
New Member
LR1796 said:
Dave you have been more than helpful already
I'll send you an orange for Yuletide.
Maria.
Northern Irelander
Well-Known Member
Cat's Eyes said:Dave you have been more than helpful already
I'll send you an orange for Yuletide.
Maria.
would that be a Terry's orange?
Cat's Eyes
New Member
LR1796 said:would that be a Terry's orange?
If you want
You might have to fight Dawn French for it thou little nay
Active Member
hello and welcome to the maddest place ever! slob, grunt and yella disco will tell you to avoid cos i be a wimmin thingy bu t ho hum, they haven't complained about my booze bathing in the zone inn! this realy good place to hang out!
GRUNT
Well-Known Member
Sod off you lot me and take5 are hijacking this thred to talk about my rocksliders.
Anyway back to the hijack no not yet. I've got the material to make them just haven't had the time, I've had the gearbox out again since you sent the plans. I'm weighing up which would be the best way to incorporate a fuel tank guard into the R/H one.
Anyway back to the hijack no not yet. I've got the material to make them just haven't had the time, I've had the gearbox out again since you sent the plans. I'm weighing up which would be the best way to incorporate a fuel tank guard into the R/H one.
Take5
New Member
Got a prototype fuel tank guard welded up at home with the plans done in this 3D CAD thingy if you want to be a guinea pig
Basically a rip-off of the Paddock 90 tank guard but with a quicker method of fitting/removal (yet to be properly tested). Basically two clinch bolts over the front outrigger and a U-bolt overe the rear jacking tube. Could very easily be attached to said rock slider and would add a bit more structural integrity. I'll e-mail you a plan of what I've done so far...
Basically a rip-off of the Paddock 90 tank guard but with a quicker method of fitting/removal (yet to be properly tested). Basically two clinch bolts over the front outrigger and a U-bolt overe the rear jacking tube. Could very easily be attached to said rock slider and would add a bit more structural integrity. I'll e-mail you a plan of what I've done so far...
Cat's Eyes
New Member
little nay said:
Hi little nay,
I be a woman thingy too so you have some company now
Thanks for the welcome.
Maria.
bettyblue22
New Member
welcome Maria
more wimin to join forces
now where's slob to complain again then?
more wimin to join forces
now where's slob to complain again then?
Cat's Eyes
New Member
bettyblue22 said:welcome Maria
more wimin to join forces
now where's slob to complain again then?
Hi ya!
Cat's Eyes
New Member
Spyderman said:
I don't think we are quite ready to launch a take over bid just yet
