Soir

Member

• Apr 16, 2022

• #1

Hello all!

I am starting my work on my 2001 P38 4.6 HSE. I figured I would join your forum as you all seem to be quite helpful and knowledgeable on here.

The current issue I am attempting to tackle and will take to the forums for is to correct my SRS and Aribag Fault.

The current issue: My Nanocom will communicate with all systems except the Airbag SPS2 therefor I am unable to diagnose the fault with the airbag at this time. I will need to fix the ODB port/ECU communication error to get rolling. Your advice will be welcome. Thanks you in advance.

 

D

Dr Strangeglove

Well-Known Member

• Apr 16, 2022

• #2

Welcome and good luck with your truck.
The folks on here are very knowledgeable and helpful and have certainly helped me with advice.

 

kermit_rr

Very

Full Member

• Apr 16, 2022

• #3

Hi and welcome, it's often the connector under the seat

 

marjon

Well-Known Member

Full Member

• Apr 16, 2022

• #4

Welcome.

J

 

Soir

Member

• Apr 16, 2022

• #5

kermit_rr said:

Hi and welcome, it's often the connector under the seat

Click to expand...

Yes, I have looked at those connections for the SRS light with no luck. I still need to sort out why the Nanocom is not speaking with the ECU for the airbag but everything else seems to be in order when communicating with the ECU.

 

kermit_rr

Very

Full Member

• Apr 16, 2022

• #6

There's a couple of 'boxes' under the RHS kick panel, at least on the RHD car, one is cruise related, the other is SRS related, give it a wiggle

 

saxavordian

Well-Known Member

• Apr 16, 2022

• #7

 

brianp38dse

Well-Known Member

• Apr 17, 2022

• #8

Hello and welcome

 

Hippo

Lord Hippo

• May 1, 2022

• #9

Welcome to the forum

Did ter get it resolved?

 

Soir

Member

• May 1, 2022

• #10

Hippo said:

Welcome to the forum

Did ter get it resolved?

Click to expand...

Unfortunately no, I have not yet figured it out. I have done over all the yellow connectors except the ones in the dash. I reviewed the shop manual and it expressly warns against using a micrometer on the SRS equipment to test. I will check the few connectors under the dash and then I suppose I am left going to the dealer? She will not pass inspection with an airbag fault. If only my Nanocom would communicate with the SRS ECU I would have a clue but I am lost.

 

Hippo

Lord Hippo

• May 1, 2022

• #11

Ask in the rr section below. They're a strange lot in there. Try not to make eye contact with them.

Main forum index:
https://www.landyzone.co.uk/forum

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

 

Soir

Member

• May 1, 2022

• #12

Hippo said:

Ask in the rr section below. They're a strange lot in there. Try not to make eye contact with them.

Main forum index:
https://www.landyzone.co.uk/forum

Range Rover:
https://www.landyzone.co.uk/forum/range-rover.10

Click to expand...

Thank you sir. Will do. I have already started a chat on the issue. I will persist. Once I fully resolve it I will ensure I post the solution.