S

sharjah

New Member

• Apr 27, 2018

• #1

am having hevac problems with intermittent operation/movement of blend motors/flaps so considering replacing motors,Can anyone tell me how many thereare?

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 27, 2018

• #2

3 blend motors - 1 for distribution and two for the temps (one on drivers side and one on passenger side)

 

S

sharjah

New Member

• Apr 28, 2018

• #3

Saint.V8 said:

3 blend motors - 1 for distribution and two for the temps (one on drivers side and one on passenger side)

Click to expand...

thanks for reply,will start on the passenger side,should be the easiest!

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 28, 2018

• #4

The thre motors are all spliced into one loom....

If replacing just the one motor, you'll need to cut the wires to it and rejoin/splice the new motot into the original loom.

 

wammers

No longer with us, RIP

Donater

• Apr 28, 2018

• #5

sharjah said:

thanks for reply,will start on the passenger side,should be the easiest!

Click to expand...

Unless you cut the wires and reconnect the new motor or disconnect the pins for that motor from the multi plug, you cannot change blend motors individually.

 

Saint.V8

Dyed-in-the-wool 100% RR Junkie

Full Member

• Apr 28, 2018

• #6

wammers said:

Unless you cut the wires and reconnect the new motor or disconnect the pins for that motor from the multi plug, you cannot change blend motors individually.

Click to expand...

Morning Tony, I hope this missive finds you in rude health.

Thats kind of what I said, only yours doesn't have spelling mistakes!!!

 

wammers

No longer with us, RIP

Donater

• Apr 28, 2018

• #7

Saint.V8 said:

Morning Tony, I hope this missive finds you in rude health.

Thats kind of what I said, only yours doesn't have spelling mistakes!!!

Click to expand...

Morning Ant. Didn't see your post. Not bad today. Have you bought the little fella any spanners yet?

 

ukadamwest

Well-Known Member

• Apr 28, 2018

• #8

sharjah said:

thanks for reply,will start on the passenger side,should be the easiest!

Click to expand...

Hahaha you funny !

When land rover built the P38 they started with the blend motors.....

... then built the rest of the car around them

 

ukadamwest

Well-Known Member

• Apr 28, 2018

• #9

wammers said:

Morning Ant. Didn't see your post. Not bad today. Have you bought the little fella any spanners yet?

Click to expand...

Set of Kamasa was in the baby shower gifts !