W

Wizzardh

New Member

• Jan 22, 2015

• #1

Typical, now that the weathers turned cold my heaters stopped blowing hot air out. The blower is still working ok, but just blowing out cold air.. Any solutions peeps..?

 

tetsu0san

Active Member

• Jan 22, 2015

• #2

Could be the cable that changes it from hot to cold from the lever on the binnacle has come lose or something. Can you hear it moving something behind the dash when you move it?

 

the_wolf

Well-Known Member

• Jan 22, 2015

• #3

There's a lever on top of the box, put the heater on and move that. If the cable has seized it will stop it switching from cold to hot, it's not uncommon for it to happen cos it's a **** design. Move the lever and if you get hot air then there's your problem.
Can't really be much else, unless your heater matrix is ####ed but if it was youd see it leaking coolant.

 

L

lynall

Well-Known Member

Full Member

• Jan 22, 2015

• #4

They dont have a hot/cold tap rather a flap that just changes the direction of the air bypassing the matrix for cold air.
As said above its a real **** design

 

R

Ricksdef

New Member

• Feb 3, 2015

• #5

Another thread has mentioned the thermostat, they changed it and the result was a toasty warm interior!