yup - look in the general q's an answers section - then do a search if yu dont find the answer.
Northern Irelander
Well-Known Member
Probably a disconnected cable from the heater dial to the heater matrix.
I take it the temperature gauge is at normal temp.
You'll have to remove the centre console and have a look
I take it the temperature gauge is at normal temp.
You'll have to remove the centre console and have a look
Had a search before i posted, all i could find was some stuff a the td engine aboult serial and parallel conections of the pipes.. I guess this doesnt apply to the 1.8
thanks
Northern Irelander
Well-Known Member
It is on the earlier models, not sure about the 2003 model.
Start by removing the heater dials, possibly some hidden screws behind them, probably some 'popper' type clips that just need a sharp tug to release them.
Someone put it together, so it has to come apart
Sirus
Your all Banned except me
selling thermal long john int materland [grey or white] i got white s they looks good int gaylander. . . . .
White ull show them **** stains up quicker for you though minge......yer shud have got black
sparkyjohn5
New Member
You dont say if its the fan not working or you are getting no heat through vents. If its no heat, see if both coolant pipes are hot going through bulkhead, if neither is hot or only one you need to bleed the heater matrix.
