tony1973 · Jan 16, 2011

hi can anyone please give me some advise i just bought a 1995 2.5 rangerover what a machine

i have a fault with the heating in side there is a handbook sign on the heater display and ive noticed that on the passanger side i cant turn down the temp.

the temp moves down on the display but it still blows out hot air

cany advise on that is wrong and what will it cost to put right

thanks

wammers · Jan 16, 2011

tony1973 said:
hi can anyone please give me some advise i just bought a 1995 2.5 rangerover what a machine

i have a fault with the heating in side there is a handbook sign on the heater display and ive noticed that on the passanger side i cant turn down the temp.

the temp moves down on the display but it still blows out hot air

cany advise on that is wrong and what will it cost to put right

thanks

Blend motor failed or flap stuck or both. Try cycling motors with buttons and see if it frees it up.

rewmer · Jan 16, 2011

You have just asked the single most asked question of all time about the P38. Use the search, and then spend the next three or four weeks reading the threads, watching the videos, looking at the pictures and reading the walkthroughs.

tony1973

New Member

wammers

No longer with us, RIP

rewmer

Well-Known Member

Similar threads