S

Stoford

New Member

• Oct 6, 2012

• #1

Hi,

The dipped beam on my 97 300tdi is next to useless. I've tried disconnecting the dim/dip resistor but it's made little or no difference. Do I need to do something else besides just unplugging it? surely by just unplugging it the circuit is broken...
Main beam is fairly good - any suggestions?

Thanks, Stoford

 

BOOMER

Bloke from Dorset

• Oct 6, 2012

• #2

Dipped beam always was crap, retrofitting early Disco2 headlamps helps alleviate it a little, along with better bulbs

 

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Events Planner

• Oct 6, 2012

• #3

Not a clue, but my dipped beam is pretty good! I'd check condition of the bulb holder and wiring connectors, mine are regularly immersed in muddy water so I clean them regularly too ..

 

discool

Well-Known Member

• Oct 6, 2012

• #4

Dim dip only works on the side light position anyway, if you dont want it just 'pull' the plug on the resister that positioned on the rear engine bulkhead.

I've found nothing wrong with the headlamps but the tinted windscreen doesn't help so I change the bulbs to Halfords Brilliance car bulb which use Xenon gas which are a lot brighter, so bright my headlamp guards now show shadows on the road.

Also check your headlamp beam adjustment.

 

Dewin

Well-Known Member

• Oct 6, 2012

• #5

I've fitted these bulbs, so much better than 'standard' bulbs ... gained so much more light and I rarely have to use main beam!

 

D

dihammond

New Member

• Oct 6, 2012

• #6

I changed the bulbs on mine to Ring XenonUltima and personally I think it made a huge improvement.

 

Bump

Well-Known Member

Events Planner

• Oct 6, 2012

• #7

nothing wrong with my standard head lights... except i get flashed by 90% of people i pass at night ... they are a bit on the bright side :/