Philgt50 · Saturday at 17:45

Can anyone tell me if it is possible to demist/clean the inside of the headlight cluster on my Freelander 1 TD4? It is the facelift front and has failed the mot on this. I am really hoping it can be done without removing the whole unit but looking at it think it can’t.
I think I have seen a post on here previously somewhere where someone did it but can’t find it. Thanks

Philgt50 · Saturday at 18:13

Philgt50 said:
Can anyone tell me if it is possible to demist/clean the inside of the headlight cluster on my Freelander 1 TD4? It is the facelift front and has failed the mot on this. I am really hoping it can be done without removing the whole unit but looking at it think it can’t.
I think I have seen a post on here previously somewhere where someone did it but can’t find it. Thanks

Ok, I have read a few more posts and think the problem is not on the inside but the outside as with everyone else’s post. The really annoying thing is I work in a scrapyard and we have binned 3 TD4’s in the last few months I could have had the lights off

andyfreelandy · Saturday at 18:23

Plenty of lens defog products available.

T Cut can also work. Cleans off easily.

Freddie17 · Saturday at 18:38

Wet and dry.
Work up to about 2000 grit. Then clear coat.

Philgt50 · 2024-10-20T07:52:04+0100

andyfreelandy said:
Plenty of lens defog products available.

T Cut can also work. Cleans off easily.

Gnna give it a go today if/when stops raining. Also gtta adjust hand brake as self adjuster doesn’t work. Obviously

. Hopefully get mot for another happy years motoring in my Hippo

andyfreelandy · 2024-10-20T09:11:33+0100

I know it is another topic, but for rear brakes, loosen handbrake cable under armrest console, access through rear panel which unclipped.

Strip, clean and apply copper grease to bearing surfaces.

Reassemble. Fit drum, apply foot brake and ensure adjust works. Then adjust cable for one click to just rub shoes when turning wheel.

Philgt50 · 2024-10-20T15:43:42+0100

andyfreelandy said:
I know it is another topic, but for rear brakes, loosen handbrake cable under armrest console, access through rear panel which unclipped.

Strip, clean and apply copper grease to bearing surfaces.

Reassemble. Fit drum, apply foot brake and ensure adjust works. Then adjust cable for one click to just rub shoes when turning wheel.

Bought headlamp cleaning stuff, seem a lot better and put new bulbs in. If it clears up this afternoon I’m gnna do them again and put a coat of the stuff on them that came with the cleaning kit. Then adjusted handbrake at drum and cable, which wasn’t as big a pain as it could’ve been. So will call garage tomorrow for retest date and hopefully will get another year out of it

Freddie17 · 2024-10-20T16:53:01+0100

Philgt50 said:
and ~~hopefully~~ will get ~~another~~ years out of it

Fixed that for you

Headlights looking good

Philgt50 · 2024-10-20T17:19:51+0100

Freddie17 said:
Fixed that for you

Headlights looking good

Cheers

Philgt50

Well-Known Member

Philgt50

Well-Known Member

andyfreelandy

Well-Known Member

Freddie17

Can’t re Member

Philgt50

Well-Known Member

andyfreelandy

Well-Known Member

Philgt50

Well-Known Member

Attachments

Freddie17

Can’t re Member

Philgt50

Well-Known Member

Similar threads