Morning all,

I have a genuine Lucas hazard switch but the wire colours (only remaining 3) don’t add up to the harness I have from Auto sparks. I’m sure the 3 wires will do the same job (they go to the relays) but does anyone know what wire from the switch should go to the plug? Failing that it’ll be trial and error

The first pic is from the switch and second the wiring harness plug. You can see there is 4 wires on the switch and 3 on the plug (2 x Green and purple, 2 x are light green and brown) thank you - Rich

Answered my own question after surfin the net…..get a picture of the original switch and highlight what wires correspond to the one you have ….simples. Now have hazard lights

Gun7354 said:

Answered my own question after surfin the net…..get a picture of the original switch and highlight what wires correspond to the one you have ….simples. Now have hazard lights

Click to expand...

Yay, another plan comes together ...