A

aaronsull

New Member

• Apr 13, 2016

• #1

Hey Guys,

Looking for some help to source an electrical plug to mate to my hazard warning switch on my 1987 Defender 90.

Essentially after some fault finding I located a broken pin receptacle on the plug part of my hazard warning switch. Does anyone know where I could find a new one?

I marked up a picture to explain exactly the part im looking for.

Thanks in advance for any help,

Aaron

 

Attachments

• 
  Defender Hazard Plug.JPG

  53.5 KB · Views: 787

Marmaduke

Well-Known Member

• Apr 13, 2016

• #2

Where have you tried? EBay, Craddocks, paddocks the list is endless

 

A

aaronsull

New Member

• Apr 13, 2016

• #3

I have tried all the usual suspects (EBay, Craddocks, paddocks, etc) but they all sell the male part of the switch but im looking for the female part of the plug. As its part of the wiring loom I guess it rarely needs replacing.

 

Flossie

Well-Known Member

• Apr 13, 2016

• #4

You want one off a scrap loom I would have thought. I chopped mine off when I fitted a Carling switch but threw it away years ago.

 

zeaphod

Well-Known Member

• Apr 13, 2016

• #5

I'd email or ring the guys at Vehicle Wiring Products. I'm sure they could source something, or point you in the right direction.

 

PaulMc

Active Member

• Apr 13, 2016

• #6

Autosparks sell a replacement connector, complete with terminals -
http://www.autosparks.co.uk/electri...ning-switch-plug-complete-with-terminals.html

They also sell the terminals individually -
http://www.autosparks.co.uk/electri...rs/pin-socket-plugs/3mm-socket-connector.html

.

 

A

aaronsull

New Member

• Apr 14, 2016

• #7

Thanks PaulMc, I think this will be perfect - just put an order in.
Aaron