K

KingMustafa

Member

• Jul 7, 2017

• #1

Dear All Good day,

I have a problem after i went for a camp in quit hot weather ( was around 46C). I came back with Hall light And foot lights on As you can see in the attached Pic. I checked wth scan tool no thing appeared, I checked the fuses all are ok. I changed the part in the pic with another one no thing happen??

Could that be happen because of the BECM, Plz Any help

 

Attachments

• 
  IMG_20170702_184113.jpg

  177.9 KB · Views: 122

M

myfirstl322

Well-Known Member

• Jul 7, 2017

• #2

Hello, I probably won't be any help but I really like your handle, I've a friend who can't close a box of Malteasers once opened, he's called Mustavanuther.....

 

terr

Active Member

• Jul 7, 2017

• #3

switch has died

 

oakey

Well-Known Member

Full Member

• Jul 7, 2017

• #4

If a dead switch shorting out, would there be a dash message to say door is open?

 

wammers

No longer with us, RIP

Donater

• Jul 8, 2017

• #5

Has someone been playing with interior lamp switch? Press centre button on interior lamp for five seconds or more. To cycle lamp function.

 

C

Colthebrummie

Well-Known Member

• Jul 8, 2017

• #6

I sometimes get this problem, I think it's a dodgy door switch. Try opening and closing each door to see if the light goes out.

Col

 

wammers

No longer with us, RIP

Donater

• Jul 8, 2017

• #7

Colthebrummie said:

I sometimes get this problem, I think it's a dodgy door switch. Try opening and closing each door to see if the light goes out.

Col

Click to expand...

If that was the case there should be a door ajar message on the message centre.

 

C

Colthebrummie

Well-Known Member

• Jul 8, 2017

• #8

wammers said:

If that was the case there should be a door ajar message on the message centre.

Click to expand...

There was in my car, KingMustafa hasn't said there wasn't in his.

Col

 

wammers

No longer with us, RIP

Donater

• Jul 8, 2017

• #9

Colthebrummie said:

There was in my car, KingMustafa hasn't said there wasn't in his.

Col

Click to expand...

Neither has he said there was. If there is no door ajar message the interior lights need to be set by pressing the middle button to cycle the functions.

 

C

Colthebrummie

Well-Known Member

• Jul 8, 2017

• #10

wammers said:

Neither has he said there was. If there is no door ajar message the interior lights need to be set by pressing the middle button to cycle the functions.

Click to expand...

You learn something new every day, the trouble is I forget it again a few days (or hours) later.

Col

 

M

myfirstl322

Well-Known Member

• Jul 8, 2017

• #11

Dusty climate, sand will be in every switch, but the door plungers would be my 'go to' as it's mechanical and probably mashed up internally.